Select a vehicle
Product Description
Details:
- Pads Included: No
- Piston Material: Phenolic
- FAQ Q1 Q: What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
- Features and Benefits: Plastic cap plug in brake port line protects threads before installation
- Piston Size (OD) (in): 1.65
- FAQ Q2 Q: What are the advantages of Phenolic pistons over steel?
- Features and Benefits: 100% pressure tested to guarantee proper function under all driving conditions
- Brake Caliper Finish: Unfinished
- FAQ Q3 Q: My car pulls to one side during braking. Why?
- Features and Benefits: New bleeder screws provide trouble-free bleeding and a positive seal
- Product Condition: Remanufactured
- Inlet Port Size: M10 x 1.0
- FAQ Q2 A: Phenolic pistons do not rust. Phenolic pistons are not affected by heat or moisture in the brake system and they also dampen brake system noise.
- FAQ Q5 Q: Could calipers be the cause of a low brake pedal?
- Placement On Vehicle: Rear Right
- E-Waste: No
- FAQ Q4 A: Brake squeal is usually caused by vibration. Always make sure the pads are tight on the caliper. Many vehicles required clinching of the tabs to assure a tight fit. Also, make sure the rotors were cut with a non-directional finish and use a anti-squeal compound.
- FAQ Q5 A: A symptom of a low brake pedal is usually caused by air in the system, misadjusted brakes, worn brake pads, a deteriorated flexible brake hose or a misadjusted Master Cylinder push rod.
- Installation Hardware Included: Yes
- Product Line Marketing Stmt: CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years' experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where - and why - original parts fail. We re-engineer our A1 CARDONE(R) Reman parts for stronger, longer-lasting performance. We build it better. Learn more at Cardone.com.
- Color: Gray
- FAQ Q4 Q: Brakes squeal all of the time. What's causing the squeal?
- Brake Piston Count: 1
- FAQ Q1 A: As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
- FAQ Q3 A: Check the steering and suspension. Then, inspect both calipers for binding or sticky slides or pins. Check brake lining for oil, grease or uneven wear. Inspect brake hoses for restriction. Check for proper tire pressure.
- Features and Benefits: Every caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads
- Bleeder Port Size: M10 x 1.0
- Mounting Bolts Included: No
- Package Contents: Caliper, Bracket, Hardware Kit
- Piston Size (OD) (mm): 42.00
- Features and Benefits: 100% S.A.E. specific rubber seals ensure like-new performance
- Features and Benefits: Mounting bolts not included
- Features and Benefits: New copper washers are included for a perfect seal
- ASM: Hyundai Santa Fe 2012-10; Kia Sorento 2013-11
- INV: Reman. Unloaded Caliper w/Bracket
- UNS: Brake Calipers
- Remanufactured: Yes
Shipping & returns
Partsmonkey.com Shipping Information
We know you want to get your vehicle back on the road or get rid of that annoying clunk as fast as posible, thats why all our orders are shipped out using super fast 2-4 business day shipping to anywhere in Canada and the USA.
We offer a flat shipping rate of $8.95 to anywhere in Canada and USA and any orders over $99 will receive free shipping. We do not offer expedited shipping since we already ship your products as fast as possible.
Orders placed before 10AM EST on weekdays will typically ship out same day. Orders after 10AM EST will ship out next business day.
Orders shipped to a PO box may not arrive in 4 days or less since only Canada Post can ship to PO boxes.
If you have any questions about one of your shipments please contact us.
Partsmonkey.com Return Policy
Here at Partsmonkey.com we want to make the returns process as effortless as possible for you. If you would like a replacement product instead of a return we can help with that too.
Return steps
- Contact us by phone, email or the return portal in your order history (You must have an account to access this page).
- We will provide a pre-paid return shipping label.
- Package the product back up and put the return label on the box.
- Drop the package off at a Canada Post, FedEx or UPS location (Depending on who has been selected to ship the return).
- When the product arrives at one of our warehouses we will inspect the product and issue a refund.
- If you have any questions about this process please contact us.
Return Conditions
- All returns must be accompanied with a Return Merchandise Authorization number. This will be provided when you call or email us requesting a return or request a return from your order history.
- Products of discretionary returns, i.e no longer want, must be in resellable condition and in original package.
- Products of warranty/defect, catalogue error, shipping damage returns will not be charged for return shipping.
- Products of discretionary returns will have the return shipping subtracted from the refund.
- Special order items are non-returnable.
- Products can be returned within 60 days of delivery.
- Core returns must be returned within 30 days. We can provide return shipping at your expense with the price of the label being deducted off your refund.