27-6530 Remanufactured Power Steering Gear By CARDONE REMAN

Details:

• FAQ Q1 Q: My steering wheel has to much play. Can I adjust the steering gear?
• Input Shaft Spline Count: 25 + Flat & Groove
• Package Contents: Gear, Instruction Sheet (2), Flushing Instruction, Instruction Tag, Sealing Kit
• Total Turns Lock to Lock: 3.0 to 3.5
• Features and Benefits: Guaranteed fit and function
• Features and Benefits: Meets or exceeds O.E.M. performance
• Input Shaft Diameter (mm): 18.42
• Pressure Port ID Size: 0
• Features and Benefits: Rust inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel
• Features and Benefits: Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
• FAQ Q2 A: If the steering wheel is rotated clockwise, from the drivers point of view and the pitman shaft turns counter clockwise, looking at the end of the pitman shaft on the bottom of the vehicle, then the gear box is a standard rotation. If the steering wheel is is rotated clockwise, from the drivers point of view and the pitman shaft turns counter clock wise, looking at the end of the pitman shaft on the bottom of the vehicle, then the gear box is reverse rotation.
• FAQ Q2 Q: There's a Standard and Reverse rotation option for my vehicle. How can I determine the my steering gear's rotation?
• Features and Benefits: Units are supplied with 100% tested and calibrated pressure relief valves for guaranteed performance
• Input Shaft Type: Splined, Single Flat
• Product Condition: Remanufactured
• E-Waste: No
• Output Shaft Diameter (mm): 31.75
• Pitman Arm Included: No
• Pump Rotation: Standard
• Return Port ID Size: 0
• Features and Benefits: All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability
• Output Shaft Diameter: 1.25
• Product Line Marketing Stmt: CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years' experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where - and why - original parts fail. We re-engineer our A1 CARDONE(R) Reman parts for stronger, longer-lasting performance. We build it better. Learn more at Cardone.com.
• Color/Finish: Black
• Number of Mounting Holes: 3
• Return Port Thread Size: M16 x 1.5
• Steering Box Type: Power Steering
• FAQ Q3 A: A variable ratio steering gear is designed to be less sensitive when the steering wheel is closer to center, making it harder for the driver to oversteer at higher speeds. As the steering wheel is turned toward the full lock postion in either direction, the steering gear begins to react more to the drivers input.
• Features and Benefits: 100% new O-rings and lip seals ensure no leaking and long-lasting performance
• Hose Port Type: O-Ring
• FAQ Q1 A: No. The rack and pinion was already adjusted at the factory. No adjustment is necessary. Try isolating the rack to find out where the play is. If you hold the inner tie rod and have someone turn the wheel, is the play gone? If yes, problem is in the front-end; if not, remove the steering knuckle and lightly install vise grips on the sector shaft and check for play. If no play exists, check steering column or steering knuckle.
• FAQ Q3 Q: What is variable ratio steering?
• Features and Benefits: 100% computerized hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function
• Input Shaft Diameter: 0.73
• Pressure Port Thread Size: M18 x 1.5
• INV: Reman. Power Steering Gear
• KEY: Power Steering Gear, Steering Gear, Gear Box
• UNS: Manual Steering Gears
• Remanufactured: Yes