Select a vehicle

2T-105 Remanufactured Turbocharger By CARDONE REMAN

2T-105 Turbocharger By CARDONE REMAN
Manufacturer: CARDONE REMAN
Availability: In stock
Manufacturer part number: 2T-105
GTIN: 082617897464
  • FAQ Q2 A: Yes, replacing the air filter and cleaning entire air and exhaust system will prevent damage to the fragile blades on the turbocharger wheels.
  • FAQ Q4 Q: Do your aftermarket turbochargers meet emission regulations?
  • Features and Benefits: All units come with the required gaskets and mounting hardware for easy installation.
  • Troubleshooting Tip: Contact of either wheel resulting from excessive radial play indicates worn rotating components likely due to improper lubrication.
  • FAQ Q1 Q: Do I need to replace the engine oil at regular intervals?
  • FAQ Q3 A: Yes, cutting off the supply of fresh oil to a hot turbocharger can cause oil coking.
  • Features and Benefits: Meets or exceeds O.E.M performance
  • Maintenance Info: Prime the Turbocharger with the supplied syringe tool before engine start up to ensure proper lubrication.
  • Product Line Marketing Stmt: CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years' experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where - and why - original parts fail. We re-engineer our A1 CARDONE(R) Reman parts for stronger, longer-lasting performance. We build it better. Learn more at
  • Wastegate Actuator Included: No
  • E-Waste: Yes
  • Maintenance Info: Clean or replace oil inlet lines of any carbon deposits, sludge or foreign objects that could restrict oil flow.
  • Troubleshooting Tip: Axial end play of the wheels and shaft in and out greater than the thickness of a sheet of paper indicates a worn thrust bearing due to excessive exhaust backpressure.
  • Maintenance Info: Clean the entire air and exhaust system including any intercooler or charge air cooler.
  • Maintenance Info: Clean the oil inlet and drain ports that connect to the engine side of the pedestal for adequate oil supply
  • Maintenance Info: Replace oil, oil filter, and air filter when installing a new turbocharger using only manufacturer recommended oil and filter types.
  • Package Contents: Turbocharger, Gaskets, Washers, O-Rings, Syringe, Instruction Sheet, Adaptor
  • Product Condition: Remanufactured
  • FAQ Q2 Q: Can the turbocharger fail if a foreign object is sucked in?
  • Features and Benefits: All component parts are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
  • Features and Benefits: All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
  • Features and Benefits: Each unit comes with a pre-lube syringe to ensure product protection during installation.
  • Maintenance Info: Allow engine to warm up at least 20 seconds after startup and up to 2 minutes when freezing to prevent oil starvation.
  • Maintenance Info: Never use Teflon tape or sealant on gaskets or fittings in the oil system to avoid potential clogs in oil supply.
  • Troubleshooting Tip: Any nicks, scratches, or chips on either wheel are evidence foreign object damage caused by contaminants entering the airflow to or from the engine.
  • Turbocharger Cooling Method: Coolant
  • Features and Benefits: 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
  • Maintenance Info: Identify any source of the restriction in the exhaust and replace damaged components.
  • Troubleshooting Tip: Failed turbochargers must be replaced and the original cause must be diagnosed and corrected to protect the new installation.
  • FAQ Q4 A: Yes, all turbochargers are engineered to match O.E. performance and comply with all federal regulations.
  • Maintenance Info: Avoid hot shut downs by allowing the engine to idle for at least 1 minute before turning off to properly cool turbocharger.
  • Features and Benefits: 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
  • Maintenance Info: Change oil, oil filter, and air filter at factor specified intervals according to the vehicle's owner manual.
  • FAQ Q3 Q: Do I need to let the engine cool off before shutting down?
  • Features and Benefits: Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
  • Maintenance Info: The following are tips to help maintain the proper operation of a Turbocharger
  • FAQ Q1 A: Yes, most turbocharger failures are caused by oil starvation from old or contaminated oil.
  • Troubleshooting Tip: A decrease in engine power may be your first indication your turbocharger is damaged or has failed.
  • Troubleshooting Tip: Common signs of wear indicating replacement may be required:
  • INV: Reman. Turbocharger
  • KEY: Turbocharger, Turbo
  • Remanufactured: Yes